HAOJI HJC tool change machining center, equipped with high-end, first-class quality; mainly for various cabinet doors, plastic door panel engraving, milling, cabinet plate cutting, automatic fast tool change, with automatic cutting secondary dust removal function High efficiency and high precision.The disc change machining center, also called the bucket change machining center, is a common type of machine. The disc magazine can be made to follow the spindle or on the side of the gantry. The advantage of the former is that the tool change speed is fast, generally in 12 tools, 16 tools or 20 tools, the cutter head is relatively heavy. If 20 tools are used, the Z-axis and the gantry load-bearing requirements are too high, especially for the Z-axis wire. The rod and rail sliders have high wear strength. Long-term use, the accuracy is reduced quickly. The magazine placed on the side of the gantry can be 12 tools--20 tools, which is stable and the tool change speed is a little slower than following the spindle. However, the accuracy of the machine and the long-term use of the stability are not affected. When all the customers and friends choose, they will pay attention to what they are paying attention to. It is necessary to buy a suitable one for you. The disc change machining center, because the servo tool magazine uses a set of servos, the cost is high, and the tool change speed is fast and the precision is high. The commonly used control system and servo motor are Taiwan Syntec system, Japan Yaskawa servo or Delta servo. Motor, Taiwan SYNTEC absolute value bus servo motor, etc. The cost is also relatively high. The total price will be higher than the straight-through tool change. Of course, the disc change machining center can also use Taiwan SYNTEC one machine, and then configure other corresponding servo motors, the price will be slightly more favorable.